Active Government Funding Opportunities

The Department of Defense is requesting quotes for a large assortment of standard commercial hardware, including bolts, hose clamps, fittings, fasteners, wire, fuses, and rope clips. This is a routine small-business set-aside purchase of existing off-the-shelf products rather than a technology development effort.

The Army is seeking a small 10-inch FPV unmanned aerial system built on Orqa brand components, including a pilot controller and goggles. It supports the Army Materiel Command's Sprint 1 effort to field compact drone capability for tactical reconnaissance and training needs.

The Army is seeking new ICP-OES spectrometers and autosamplers for in-service oil analysis under ASTM D5185, for integration with existing lab data systems. It's a small-business set-aside requiring brand-name-or-equal products with CSV data export.

This Direct to Phase II opportunity seeks proven cyber defense technology for fog and edge computing devices that can autonomously detect and respond to attacks. Proposals must demonstrate a working prototype and scalable architecture capable of preventing or mitigating cyber threats across distributed edge-node environments.

The Air Force seeks a non-destructive launching system for high-precision long rod projectile delivery to improve Live Fire Test and Evaluation data fidelity. This capability enables reliable flight control and targeting accuracy, reducing acquisition risk and supporting vulnerability assessments for aircraft survivability development.

Seeks an edge-deployable AI computer vision prototype that tracks, detects, and re-identifies vessels of interest in contested maritime areas without cloud connectivity. It aims to help warfighters keep continuous custody of vessels even with limited communications and minimal labeled data.

The Army is seeking a survey-grade drone system with integrated controller, ground station, and wireless transmission, plus a pulse data processor with RTX licensing for geospatial data work. It's a small-business set-aside purchase of new equipment with a 2-year warranty.

Sources Sought for Industrial Control Technician and Industrial Technician services supporting facilities operations at Buckley Space Force Base. Requires Secret clearance. Services-based staffing and facilities maintenance work.

DARPA seeks autonomous systems capable of detecting casualties and chemical toxidromes in contaminated mass casualty environments where human responders face hazardous conditions. The technology must locate injuries, recommend triage priorities, and deliver initial treatments to improve survival rates when rapid medical response is critical.

This SBIR Phase II effort seeks a secure, modernized Technical Data Package system with encrypted visualization, configuration management, and AI-driven analytics to protect Air and Space Force mission-critical asset data while ensuring Zero Trust compliance and seamless lifecycle management across complex platforms.

The Army Corps of Engineers plans a sole-source purchase of a SIAM corporate membership, which provides electronic access to SIAM's applied mathematics journals for ERDC researchers. It is a subscription license for existing published content rather than a new technology development effort.

The Army is seeking a small business to supply 25 identical 11-inch Apple iPads, one Microsoft Surface notebook, and 25 matching tablet stands for general use. This is a standard commercial equipment purchase rather than new technology development.

The Department of War seeks a ground-based, affordable mass (G-BAM) precision payload delivery system using commercial technologies to provide cost-effective, high-volume alternatives to expensive hypersonic systems. This initiative addresses the need for sustained "magazine depth" capability against peer adversaries while maintaining operational affordability.

The Army seeks autonomous and minimally-manned ground and aerial systems for sustainment and recovery in contested environments where GPS and communications are degraded. Solutions must operate with minimal oversight across payload transport, power generation, refueling, and vehicle recovery to reduce soldier exposure and maintain mission continuity.

The Army is seeking 100 total units of 4140 steel mechanical tubing (7.0" OD x 2.0" wall, ASTM A519) in cut lengths of 2 to 10 feet, with certification documentation required. This is a standard commercial material procurement, open to small businesses on a brand-name-or-equal basis.

A contractor is sought to plan and run the Army JROTC Leadership and Academic Bowls, including online competitions, a resident championship, an essay contest, and livestreamed award ceremonies. It supports cadet leadership development, academic skills, and program visibility.

Public TReX II listing for TReXII-RFS-27-01 (PM TRADE): 120mm Mortar Training System. Official RFS package is members-only. RallyProp tracks new listings and date changes from the public table.

Seeks a contractor to perform heat treatment and mechanical property testing on E81 tube and cap material for the Watervliet Arsenal in New York. This is a service-based testing requirement supporting existing Army materials production and quality verification.

Seeks a manufacturer to produce gear racks to a specified engineering drawing for the M284 155mm cannon used by the Army. This is a standard fabrication and delivery procurement for a defined existing part.

This SBIR Phase II solicitation seeks an automated software platform that ingests Technical Data Packages (3D CAD, drawings, BOMs) to autonomously generate collision-free robotic inspection trajectories, eliminating manual programming. The solution targets aerospace quality control bottlenecks by compressing setup timelines from days to hours for agile manufacturing environments.

The Army is seeking bulk steel coil stock in ash grey and polar white (26 gauge, about 42-43 inches wide) to be formed into R-panel siding. This is a standard commercial materials purchase for construction use, delivered F.O.B. destination within 30 days.

This Army Joint Munitions Command RFQ seeks new W10x19 and W6x25 structural steel I-beams, delivered F.O.B. destination within 30 days. It is a standard commercial product purchase with no research or novel technology component.

The Army is seeking a quote for 8-inch steel structural members, including eave beams and C and Z purlins, in 20-foot lengths for building framing. This is a standard commercial products purchase of existing items, with no research or new technology development involved.

A Department of Defense solicitation seeking a progressive design-build team for a new blood donor center at Joint Base San Antonio. The project covers facility design, construction, and phased transition of existing operations, with an industry day planned for October 2026.

A construction and maintenance solicitation from the Army Corps of Engineers for repairs to the fueling system at Mather, California. The work covers tank upgrades, containment basin drainage fixes, pavement replacement, and installation of an automatic tank gauging system.